| KT Reflective Transfer Film Specifications: |
| Item KT8040 |
| — ANSI / ISEA LEVEL 2 |
| Characteristics: |
Heat activated reflective transfer |
|
Light Weight |
|
Flexible |
|
Applicable to light weight fabric |
|
Do not seal well with nylon. |
|
Home Washable Warm at 40℃, 105℉ |
|
A plastic protective film over the glass bead side |
|
|
| Consistence: |
The reflective transfer film consists a heat activated adhesive layer to which micro glass sphere lenses are bonded with a waterproof flexible resin. Over the top, a protective plastic film is semi bond to the glass beads lenses. |
| Instruction: |
Suggested sealing heat is 250℉ with pressure of 5 psf for duration of 5 second. Peel off the covering protective film after the products being cooled. |
| Retro Reflective Photometric Performance: |
|
Retro-reflective performance according to the ANSI/ISEA 107-2004 standard has been tested to level 2 after sealing on a polyester fabric. |
| Color: |
Silver. |
| Size: |
The standard size is 39" by 100 yd rolls. Other sizes may be slid from 39〞roll to the size as specified. |
| Weight: |
The net weight for 1" X 100 yard roll is 2 ¾ lb. |
| Packing: |
1"X 100 yd rolls |
24 rolls/ctn |
| |
2"X 100 yd rolls |
12 rolls/ctn |
| |
39"X 100 yd rolls |
1 roll/ctn |
| Item KT8042 |
| — ANSI / ISEA LEVEL 2 |
| Characteristics: |
Heat activated reflective transfer |
| |
Light Weight |
| |
Flexible |
| |
Applicable to light weight fabric, PVC films. |
| |
Do not seal well with nylon. |
| |
Home Washable Warm at 40℃, 105℉ |
| |
A protective plastic or release paper is placed on the adhesives side, to allow printing before heat pressing. |
| Consistence: |
The reflective transfer film consists a heat activated adhesive layer to which micro glass bead lenses are bonded with a waterproof flexible resin. A protective plastic film or released paper is semi bond to the adhesive side. |
| Instruction: |
The protective plastic film must be removed before application, suggested sealing heat is 250℉ with pressure of 5 psf for duration of 5 second. |
| Retro Reflective Photometric Performance: |
| |
Retro-reflective performance according to the ANSI/ISEA 107-2004 standard is tested to level 2 |
| Color: |
Silver. |
| Size: |
The standard size is 39"by 100 yd rolls. Other sizes may be slid from 39" roll to the size as specified. |
| Weight: |
The net weight for 1"X 100 yard roll is 2 ¾ lb. |
| Packing: |
1"X 100 yd rolls |
24 rolls/ctn |
| |
2"X 100 yd rolls |
12 rolls/ctn |
| |
39"X 100 yd rolls |
1 roll/ctn |
